Updated Technical Specifications for the Massey Ferguson 375 4WD Tractor
Rear Axle1,423 – 2,134 mm“`html
| Performance | Engine Power at 2,000 rpm | 75 (B.S) hp |
| Torque at 1,400 rpm | 290 Nm | |
| PTO Power at Rated | 69.5 hp | |
| PTO Power at 540 rpm | 63.0 hp | |
| *Certified at BS AU 141a | ||
| Electrics | Voltage | 12V, Negative Earth |
| Battery | 110 Ah | |
| Starter | 2.8 kW | |
| Alternator | 45 Amp | |
| Transmission | Type | Sliding Spur |
| Number of Gears | 8 Forward, 2 Reverse | |
| Road Speed at 2,250 Engine RPM with 16.9/14×30 rear tyres | Gear | Speed (km/hr) |
| Forward 1 (First Low) | 2.3 | |
| Forward 2 | 3.4 | |
| Forward 3 | 4.7 | |
| Forward 4 | 6.3 | |
| Forward 5 (First High) | 9.3 | |
| Forward 6 | 13.6 | |
| Forward 7 | 18.6 | |
| Forward 8 | 25.0 | |
| Reverse 1 (Low) | 3.2 | |
| Reverse 2 (High) | 12.7 | |
| Hydraulics | Functions | Draft Control, Position Control, Response Control, Constant Pumping |
| Pump Type | Reciprocating, Ferguson Pump | |
| Oil Flow | 16.7 ltr /min | |
| Pressure | 21.2 Mpa at normal operating temperature | |
| Lift Capacity with Lower | 2,145 kg With Cat, I & II Interchangeable Balls | |
| Links Horizontal | ||
| Rear Axle & Brakes | Axle Type | Straddle with apicyclic reduction unit |
| Brake Type | Oil immersed, Multi-disc | |
| Brake Pedal | Pendant | |
| Braking Area | 1.774 sq. cm | |
| Brake Actuation | Hydraulic | |
| Parking Brake | Hand Lever Operated | |
| Tyres | Front | 7.50 – 16 (6PR) |
| Rear | 16.9 / 14 – 30 (6PR) | |
| Clutch | Type | Dual |
| Diameter | 305 x 254 mm | |
| Lining Material | Cerametallic | |
| Front Axle | Type | Heavy Duty Box Section, Adjustable |
| Steering | Type | Hydrostatic |
| Track Adjustment | Front Axle | 1,271 – 1,881 mm |
| Engine | Make / Type | Diesel / 4.248 |
| No. of Cylinders | 4 | |
| Injection | Direct | |
| Bore | 101 mm | |
| Stroke | 127 mm | |
| Capacity (litres) | 4.07 L | |
| Compression Ratio | 16:1 | |
| Aspiration | Natural | |
| Starting Aid | Thermostart | |
| Throttle Control | Hand and Feet | |
| Cooling | Water | |
| Air Cleaner Type | Oil Bath | |
| Air Pre-Cleaner | Oil Bath | |
| Fuel Filter | Dual, High Capacity | |
| Exhaust | Vertical Muffler under Bonnet | |
| Note: This is a premium heavy duty engine with tuffrided crankshaft for longer life in adverse conditions. | ||
| Power Take Off | Type | Live |
| Engine Speed at 540 pto rpm | 1,789 rpm | |
| Shaft Diameter | 35mm | |
| No. of Splines | 6 | |
| Instrumentation | Guages | Technometer, Hourmeter, Fuel Level, Battery Condition & Water Temperature |
| Warning Lights | Direction Indicators, Electric Charge, Headlight Main Beam, Low Engine Oil Pressure, Brake Lights & Auxiliary Socket | |
| Weight & Dimensions | Weight | Gross Weight: 2,355 kg |
| Dimensions | ||
| Wheel Base | 2,170 mm | |
| Overall Length | 3,670 mm | |
| Overall Width (Min) | 1,970 mm | |
| Height | Over Exhaust: 2,485 mm | |
| Over Steering Wheel | 1,730 mm | |
| Turning Circle | With Brakes | 7,260 mm |
| Without Brakes | 8,095 mm | |
| Ground Clearance | Under Gear Box | 465 mm |
| Capacities | Fuel Tank | 108.0L |
| Engine Pump | 7.5L | |
| Cooling System | 15.2L | |
| Hydraulic System | 36.0L | |
| Hydrostatic Steering Reservoir | 2.0L | |
| Oil Bath Air-Cleaner | 0.7L | |
| Brake Oil | 0.25L | |
| Standard Equipment | Weight frame without weights, standard tool box with set of tools, Top Link, Top Link End Cat-I, Cat I & II balls, Check Chains, Spring Suspension Seat, Flat Top Fender & Operator’s Manual | |
| Optional Equipment | Front End Weights, Swinging Draw Bar, Sun Canopy, Pintle Hook | |
Reviews
There are no reviews yet.